Technical specifications of full-range products
Parameter tables for every product family we manufacture, including customization ranges and maintenance guidance.
Disc brush
| Parameter | Specification range | Remarks |
|---|---|---|
| Filament material | PP, PA | Single or mixed material customization available |
| Filament diameter | 0.5mm | Compatible with most industrial cleaning equipment speeds |
| Block size (inch) | 11, 13-21 | Covers mainstream models, customizable |
| Filament colour | Red/black, pure black | Colour-coded for scenarios (red/black for oil-contaminated areas) |
| Manufacturing process | Integral injection molding | Filament shedding rate 0.1%, high firmness |
- · Key specs such as filament material, dimensions and operational parameters are optimised for durability and compatibility, with non-standard customization available.
Shampoo brush
| Parameter | Specification range | Core advantages |
|---|---|---|
| Filament material | PP (0.28mm), PA (0.5mm) | PP for soft cleaning, PA for enhanced durability |
| Block size (inch) | 14, 15, 15.5, 16, 17, 18, 19, 19.75 | Compatible with carpet cleaners; 15.5 inch bestseller |
| Filament structure | Pentagon, ring | Uniform shampoo distribution, cleaning efficiency +15% |
| Applicable equipment | Industrial carpet cleaners | Requires matching equipment power ≥1.5kW |
- · Break in before use: run dry on unpolished concrete for 15-20 minutes to remove manufacturing burrs and avoid carpet scratches.
- · Rinse filaments with clean water after use to prevent residue and bacterial growth.
Pad driver
| Parameter | Specification range | Type differences |
|---|---|---|
| Block size (inch) | 9.6, 11-19.75 (full size) | 14-17 inches most commonly used |
| Material | High-strength polypropylene | Impact-resistant, non-brittle at -20°C |
| Fixing method | MAL-LOK tufting, hook design | MAL-LOK for automatic machines, hooks for small equipment |
| Height | 1.5cm, 3cm (standard) | Customizable 2-5cm |
- · Single cleaning (dust removal): 1.5cm model — lightweight, easy consumable replacement.
- · Combined cleaning and polishing: 3cm model — high stability, suitable for 300-500r/min polishing.
Grit rotary brush
| Parameter | Specification range | Technical description |
|---|---|---|
| Filament type | Grit, steel wire | Grit for fine cleaning, steel wire for heavy dirt |
| Grit specification | .070"/46 to .018"/500 | Diameter and particle size combination, customizable |
| Block size (inch) | 9.6, 11-19.75 | Universal with pad driver, interchangeable |
| Max tolerable temperature | 80°C (grit), 120°C (steel wire) | Excessive temperature damages filaments |
- · Must be used wet: add 5-10L clean water per hour to prevent silicon carbide overheating.
- · Rinse filament gaps with high-pressure water after use to avoid residual scratches.
- · Apply anti-rust oil to steel wire models monthly.
Pad centering devices
| Model | Applicable equipment | Material | Installation |
|---|---|---|---|
| CZ-L1 | Small cleaners | ABS engineering plastic | Snap-on, tool-free |
| CZ-L2 | Medium cleaners (1-2kW) | Reinforced nylon | Screw-fixed (4mm hex wrench) |
| CZ-L3 | Large cleaners (2-3kW) | Aluminium alloy | Bolt-fixed (6mm wrench) |
| CZ-L4 | Custom equipment | 304 stainless steel | Custom mounting structure |
- · Centering accuracy ±0.5mm, avoiding uneven cleaning from eccentricity.
- · Shock absorption reduces vibration by 20%, protecting equipment bearings.
Clutch plate
| Model range | Applicable brush disc size (inch) | Material | Torque tolerance |
|---|---|---|---|
| CZ-01 – CZ-10 | 11-17 | High-friction nitrile rubber + steel plate | 50-100N·m |
| CZ-11 – CZ-20 | 18-19.75 | Silicone + aluminium alloy plate | 100-150N·m |
| CZ-21 – CZ-23 | Custom size | Carbon fibre + stainless steel plate | 150-200N·m |
- · Replace every 6-12 months, immediately if cracked or worn more than 2mm.
- · Temperature resistance: nitrile rubber 80°C, silicone 120°C, carbon fibre 200°C.
Driver
| Core component | Specification | Performance advantage |
|---|---|---|
| Motor | DC 12V/24V | Adjustable speed 0-300r/min |
| Transmission | Gear reducer | Reduction ratio 5:1-10:1, torque amplified for heavy loads |
| Housing material | PP + glass fibre engineering plastic | IP54 waterproof, impact-resistant, outdoor-compatible |
| Connection interface | Standard ISO interface | Compatible with most equipment, easy replacement |
- · Automatic cleaning robots: 12V model, standby current <10mA, battery life up to 8h.
- · Large sweepers: 24V model, torque 150N·m, compatible with 21-inch brush discs.
Squeegee assembly
| Component | Specification | Technical highlight |
|---|---|---|
| Connection nozzle | Integral metal die-casting | Aluminium alloy, weld-free |
| Structural design | Arc, V-shape | Arc for flat surfaces, V-shape for non-slip tiles |
| Applicable equipment | Floor scrubbers, sweeper-scrubbers | Interface diameter 50-100mm, customizable |
| Weight | 1.5-3kg by size | Lightweight design, minimal equipment load |
- · Adjust angle to 15-30° — too steep leaves water behind, too shallow wears the rubber.
- · Replace the sealing ring every 3 months and check for leaks regularly.
Squeegee rubber
| Type | Material | Wear coefficient (mm³/1000 cycles) | Oil resistance | Scenario | Price range (CNY/m) |
|---|---|---|---|---|---|
| Polyurethane strip | Polyester-based polyurethane | 5-8 | Grade A (mineral oil resistant) | Factory / garage oily floors | 30-50 |
| Standard rubber strip | Natural rubber + SBR | 10-15 | Grade C (non-oil resistant) | Mall / hotel smooth tile | 10-20 |
- · Replace when the thickness wears down from 10mm.
- · Replace if residual water width exceeds 5mm, or if leakage or scraping streaks appear.
Brush housing head
| Material type | Composition | Physical property | Applicable scenario |
|---|---|---|---|
| Aluminium alloy | 6061 aluminium alloy | Tensile strength 276MPa, corrosion-resistant | Outdoor large sweepers |
| Iron | Q235 low-carbon steel | Hardness HB195, high load-bearing capacity | Industrial heavy-duty equipment |
| Plastic | PP + 30% glass fibre | Impact strength 15kJ/m², non-brittle at -30°C | Household / small cleaners |
- · Colour: Pantone code customization, e.g. RAL9005 black.
- · Structure: custom interface size and fixing holes, 7-15 day lead time.
Bumper head
| Parameter | Specification range | Technical feature |
|---|---|---|
| Material | Elastic rubber (Shore A50-60) | Impact-absorbent, 100% recovery after collision |
| Compatible brush disc size | 13-21 inches | Ring structure, full brush disc edge coverage |
| Installation | Snap + screw fixation | Tool-light installation, easy disassembly |
| Temperature resistance | -20°C to 80°C | Stable elasticity in extreme temperatures |
- · Water blocking height ≥5cm, preventing sewage splashing.
- · Reduces brush disc damage rate from 15% to 3%.
Hose
| Type | Material structure | Performance indicator | Specification range |
|---|---|---|---|
| Drain hose | PVC + glass fibre + inner steel wire | Water pressure ≥1MPa, pH 2-12 acid/alkali resistant | ID 20-50mm, length 1-5m |
| Vacuum hose | PVC + glass fibre + spiral steel wire | Negative pressure ≥0.08MPa, UV4 grade | ID 30-80mm, length 2-10m |
- · Smooth inner wall (Ra 0.8μm) reduces scaling and clogging.
- · Five-year outdoor anti-aging, twice the service life of standard PVC hoses.
Bristle patterns
| Pattern | Description | Typical use |
|---|---|---|
| Spiral single row | Single row wound in a spiral | General sweeping, light debris |
| Herringbone single row | V-shaped single row | Guiding debris inward on sweepers |
| Double row spiral | Two rows in a spiral pattern | Heavy debris, longer wear life |
Need a specification not listed here?
Send your machine model and required dimensions — we confirm the parameter set and quote a custom run.
Request a quote